Pessoal estou a ponderar mandar vir este modulo que permite ver mais infos no quadrante.
Pelo que percebi ate se pode aumentar ou diminuir a presão dos turbos , mas com outro modulo, nisto não tinha interesse , queria mesmo era o AFR e a presão de turbo no quadrante.
faz estas funções.
display Boost,
AFR, and other performance data in the cluster driver information display LCD
AFR run replay - Provides a quick snapshot of your AFR data & RPM from your most recent WOT pass.
Plug and Play Installation: Each unit comes with built in factory connectors and hand built harnesses for a "Plug and Play' Installation
(2x) Auxiliary 5v sensor inputs: Can be adapted to display data from various aftermarket sensors such as wideband O2, oil temp, fuel pressure, water/meth flow, etc.
Automatic Data Logging! - PPD creates a time stamped log with the following data elements every time the driver goes wide open throttle (WOT). The logs can be retrieved at a later date using your computer.
TPS, RPM, Speed, AFR*, N75 Duty Cyle* Note: Optional external feeds required.
Programmable Audible Alerts- RPM limit, over boost, etc.
Performance run monitor: 0-60, F.A.T.S, etc
Extended capabilities through external add on modules. The following optional add-on module will be available at product launch:
Plug and Play Micro Shift Warning LED
Plug and Play integrated N75 electronic boost control provides the following features:
Complete control over the OEM N75 valve.
3 driver definable boost maps (low boost, mid boost, HIGH BOOST)
Instantly change boost map via menu control stalk (I love this feature!)
RPM Compensation: Eliminates boost tapering (drop off) at high engine RPM)
Gear-based Mapping: Adjust your boost based on gear (will be added later via firmware update)
Factory connectors are provided to facilitate plug and play installation and is designed to KEEP THE ECU HAPPY! (No check engine light related to disconnecting the N75).
The addition of external modules and upcoming firmware updates will continue to expand the device's capabilities.
video
pelo que percebi o que faz isso é isto , e onde se liga este modulo?
Alguem tem ou ja exprimentou?
Pelo que percebi ate se pode aumentar ou diminuir a presão dos turbos , mas com outro modulo, nisto não tinha interesse , queria mesmo era o AFR e a presão de turbo no quadrante.
faz estas funções.
display Boost,
AFR, and other performance data in the cluster driver information display LCD
AFR run replay - Provides a quick snapshot of your AFR data & RPM from your most recent WOT pass.
Plug and Play Installation: Each unit comes with built in factory connectors and hand built harnesses for a "Plug and Play' Installation
(2x) Auxiliary 5v sensor inputs: Can be adapted to display data from various aftermarket sensors such as wideband O2, oil temp, fuel pressure, water/meth flow, etc.
Automatic Data Logging! - PPD creates a time stamped log with the following data elements every time the driver goes wide open throttle (WOT). The logs can be retrieved at a later date using your computer.
TPS, RPM, Speed, AFR*, N75 Duty Cyle* Note: Optional external feeds required.
Programmable Audible Alerts- RPM limit, over boost, etc.
Performance run monitor: 0-60, F.A.T.S, etc
Extended capabilities through external add on modules. The following optional add-on module will be available at product launch:
Plug and Play Micro Shift Warning LED
Plug and Play integrated N75 electronic boost control provides the following features:
Complete control over the OEM N75 valve.
3 driver definable boost maps (low boost, mid boost, HIGH BOOST)
Instantly change boost map via menu control stalk (I love this feature!)
RPM Compensation: Eliminates boost tapering (drop off) at high engine RPM)
Gear-based Mapping: Adjust your boost based on gear (will be added later via firmware update)
Factory connectors are provided to facilitate plug and play installation and is designed to KEEP THE ECU HAPPY! (No check engine light related to disconnecting the N75).
The addition of external modules and upcoming firmware updates will continue to expand the device's capabilities.
video
pelo que percebi o que faz isso é isto , e onde se liga este modulo?
Alguem tem ou ja exprimentou?
Last edited by a moderator:
ray:
