Bom dia,
Tive a fazer um scan e encontrei estes três erros, mas só apenas ao 19558 é que ha informações...
Não faço ideia do que possa ser..se alguem me pudesse ajudar a decifrar isto...
Obrigado
Address 01: Engine Labels: None
Part No SW: 03G 906 016 FG HW: 028 101 190 4
Component: R4 2,0L EDC G000SG 6251
Coding: 0000072
Shop #: WSC 06314
3 Faults Found:
19558 - Motor for Intake Manifold Flap (V157): No Signal
P3102 - 000 - -
Freeze Frame:
RPM: 0 /min
Torque: 0.0 Nm
Speed: 0.0 km/h
Load: 0.0 %
Voltage: 12.46 V
Bin. Bits: 00101111
Torque: 0.0 Nm
Torque: 354.0 Nm
19557 - Motor for Intake Manifold Flap (V157): Open or Short to Ground
P3101 - 000 - -
Freeze Frame:
RPM: 1659 /min
Torque: 0.0 Nm
Speed: 43.0 km/h
Load: 0.0 %
Voltage: 14.14 V
Bin. Bits: 00101000
Torque: 194.0 Nm
Torque: 0.0 Nm
17075 - Fan 1 Control Circuit: Short to GND
P0691 - 000 - -
Freeze Frame:
RPM: 798 /min
Torque: 44.0 Nm
Speed: 3.0 km/h
Load: 0.0 %
Voltage: 14.06 V
Bin. Bits: 00101111
Temperature: 83.7°C
Duty Cycle: 9.6 %
Readiness: 1 2 0 0 0
Tive a fazer um scan e encontrei estes três erros, mas só apenas ao 19558 é que ha informações...
Não faço ideia do que possa ser..se alguem me pudesse ajudar a decifrar isto...
Obrigado
Address 01: Engine Labels: None
Part No SW: 03G 906 016 FG HW: 028 101 190 4
Component: R4 2,0L EDC G000SG 6251
Coding: 0000072
Shop #: WSC 06314
3 Faults Found:
19558 - Motor for Intake Manifold Flap (V157): No Signal
P3102 - 000 - -
Freeze Frame:
RPM: 0 /min
Torque: 0.0 Nm
Speed: 0.0 km/h
Load: 0.0 %
Voltage: 12.46 V
Bin. Bits: 00101111
Torque: 0.0 Nm
Torque: 354.0 Nm
19557 - Motor for Intake Manifold Flap (V157): Open or Short to Ground
P3101 - 000 - -
Freeze Frame:
RPM: 1659 /min
Torque: 0.0 Nm
Speed: 43.0 km/h
Load: 0.0 %
Voltage: 14.14 V
Bin. Bits: 00101000
Torque: 194.0 Nm
Torque: 0.0 Nm
17075 - Fan 1 Control Circuit: Short to GND
P0691 - 000 - -
Freeze Frame:
RPM: 798 /min
Torque: 44.0 Nm
Speed: 3.0 km/h
Load: 0.0 %
Voltage: 14.06 V
Bin. Bits: 00101111
Temperature: 83.7°C
Duty Cycle: 9.6 %
Readiness: 1 2 0 0 0
